Water Born Painting Side Draft Paint Booth With PU Wall Panel WD-6 manufacturer from China WINDAN INTERNATIONAL COMPANY

Water Born Painting Side Draft Paint Booth With PU Wall Panel

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: WD-6

Water Born Painting Side Draft Paint Booth With PU Wall Panel Why to use a&nb

Water Born Painting Side Draft Paint Booth With PU Wall Panel

Why to use a spray booth?

Most important reasons to use a spray booth are as following:

To limit the application of a dangerous material in a limited controlled environment
To prevent dangerous over spray and volatiles to escape from limits and cause a fire or explosion close to the operations.
To control air/fuel mixture in order to prevent formation of a flammable mixture.
To provide a clean environment to be used for painting.

For nearly a century, spray booths have been critical to our hemisphere’s defence and protection.
Not only here, they arised in every industry type all over the world.

Advantages:

High specification and best quality
Popular model in European market
C.E, ISO Approved model
High capture of contaminants in the working area
High energy saving,Low maintenance costs

Detail Specification WD-6

Inside dimension	6900×3900×2700 mm(L×W×H)
Outside dimension	7000×5600×3500 mm(L×W×H)
Front door	Folding door, 3 folds, 3000×2600 mm(W×H), without frame cover, square glass windows, colour : blue
Emergency door	1 unit, 800×2000mm(W×H), colour: white
Basement	Galvanized steel assemble, 300mm high, quadrate steel support, with adjustable bolt, full grilles made by flat bar and twisted steel, galvanized. 3 ramps , 900×2000mm/pc.
Wall Panels	Thickness:50mm, width:1150mm, tongue and groove structure, 0.476mm colour steel with PU insulation inside, colour: white.
Light	Ceiling Lights: 8Units×2Pcs=16Pcs×58W, Side Lights: 10Units×4Pcs=40Pcs ×58W, with electronic ballasts, tri-phosphor Philips light tube, Illuminate: ≥1000LUX
Generator cabinet	Intake from side upper, exhaust from back upper, aluminium alloy frame; white coated steel covered, filled with heat preservation material inside.
Intake and Exhaust system	Inlet: 2×4KW double-intake centrifugal fans, belt drive, model TAE-400H, total air capacity: 25000m3/h.
Intake and Exhaust system	Outlet: 1×7.5KW double-intake centrifugal fan, belt drive, model TAE-560H, air capacity: 24000m3/h.
Heating system	RIELLO RG5S diesel burner, stainless steel heat exchanger, pneumatic damper actuates from spraying to baking cycle. Max. heating productivity: 260000kcal/h, Max temperature: 80°C.
Purification system	Pre-filter, ceiling filter, fibreglass filter, cylindrical activated carbon filter
Water-borne paint system	With water-borne paint system on the both sides of ceiling, stainless steel nozzle, 4 units 0.77KW centrifugal fan, total air quantity: 13400 m3/h
Roof	Galvanized steel
Control system	Spraying, heat spraying, time setting, lighting switch, failure indicator, thermostat, power supply switch, waterBorne paint system switch, emergency stop, all motors are normal start.
Total power	22.5KW

Spray Booth Technical Parameters WD-6

Inside Dimension: (mm)	6900×3900×2700mm L×W×H
Outside Dimension: (mm)	7000×5350×3500mm L×W×H
Width of Entrance: (mm)	3000
Height of Entrance: (mm)	2600
Escape Door Dimension: (mm)	800×2000 W×H
Intake Air Fan Capacity: (m3/h)	25000
Exhaust Air Fan Capacity: (m3/h)	24000
Free Air Speed: (m/s)	≥0.32
Frequency of Air Exchange: (time/h)	300
Maximum Working Temperature: ()	80
Max. Heating Productivity: (kcal/h)	260000
Illumination: (Lux)	>1000
Air Filter Efficiency:	>95%
Noise: db(A)	<80
Total Power: (KW)	22.5KW

Showing product to customer

Water born system inside the booth

Product's package

Warranty
All electron component are guaranteed for 12 months from the date of receipt.During warranty damage
are free replacement.Customer bear the expense of freightage.